#include "asm/includes.h" //#include "asm/ldo.h" //#include "asm/cache.h" #include "asm/wdt.h" #include "asm/debug.h" #include "asm/efuse.h" #include "asm/power/p33.h" #include "asm/efuse.h" #include "system/task.h" #include "timer.h" #include "app_config.h" #include "gpio.h" //#include "power_manage.h" // #define LOG_TAG_CONST SETUP #define LOG_TAG "[SETUP]" #define LOG_ERROR_ENABLE #define LOG_DEBUG_ENABLE #define LOG_INFO_ENABLE /* #define LOG_DUMP_ENABLE */ #define LOG_CLI_ENABLE #include "debug.h" //extern void dv15_dac_early_init(u8 ldo_sel, u8 pwr_sel, u32 dly_msecs); // extern void sys_timer_init(void); extern void tick_timer_init(void); extern u32 reset_source_dump(void); extern u8 power_reset_source_dump(void); extern void exception_irq_handler(void); int __crc16_mutex_init(); extern int __crc16_mutex_init(); #define DEBUG_SINGAL_IDLE(x) //if (x) IO_DEBUG_1(A, 7) else IO_DEBUG_0(A, 7) #define DEBUG_SINGAL_1S(x) //if (x) IO_DEBUG_1(A, 6) else IO_DEBUG_0(A, 6) #if (defined CONFIG_DEBUG_ENABLE) || (defined CONFIG_DEBUG_LITE_ENABLE) void debug_uart_init(const struct uart_platform_data *data); #endif #if 0 ___interrupt void exception_irq_handler(void) { ___trig; exception_analyze(); log_flush(); while (1); } #endif /* * 此函数在cpu0上电后首先被调用,负责初始化cpu内部模块 * * 此函数返回后,操作系统才开始初始化并运行 * */ #if 0 static void early_putchar(char a) { if (a == '\n') { UT2_BUF = '\r'; __asm_csync(); while ((UT2_CON & BIT(15)) == 0); } UT2_BUF = a; __asm_csync(); while ((UT2_CON & BIT(15)) == 0); } void early_puts(char *s) { do { early_putchar(*s); } while (*(++s)); } #endif void cpu_assert_debug() { #ifdef CONFIG_DEBUG_ENABLE log_flush(); local_irq_disable(); while (1); #else P3_PCNT_SET0 = 0xac; cpu_reset(); #endif } void timer(void *p) { /* DEBUG_SINGAL_1S(1); */ sys_timer_dump_time(); /* DEBUG_SINGAL_1S(0);*/ } void app_bank_init() { #ifdef CONFIG_CODE_BANK_ENABLE extern void bank_syscall_entry(); request_irq(IRQ_SYSCALL_IDX, 3, bank_syscall_entry, 0); extern void load_common_code(); load_common_code(); #endif } static void (*uart_db_irq_handler_callback)(u8 *packet, u32 size); extern void uart_dev_set_irq_handler_hook(void *uart_irq_hook); static void uart_db_irq_handler_hook(u8 *rbuf, u32 len) { if (len) { log_info("uart_rx_data %d:", len); put_buf(rbuf, len); } if (uart_db_irq_handler_callback) { uart_db_irq_handler_callback(rbuf, len); } } void uart_db_regiest_recieve_callback(void *rx_cb) { uart_db_irq_handler_callback = rx_cb; } u32 stack_magic[4] sec(.stack_magic); u32 stack_magic0[4] sec(.stack_magic0); void memory_init(void); void setup_arch() { #if TCFG_CHARGE_ENABLE //防止LDOIN先上电,VBAT后上电导致的VDC12过压(越靠前调用越好) extern void power_enter_charge_mode(void); power_enter_charge_mode(); #endif //asm("trigger "); JL_UART0->CON0 |= BIT(2); //use lp waiting, must set Tx pending Enable memory_init(); memset(stack_magic, 0x5a, sizeof(stack_magic)); memset(stack_magic0, 0x5a, sizeof(stack_magic0)); //P11 系统必须提前打开 p11_init(); wdt_init(WDT_4S); /* wdt_close(); */ clk_voltage_init(TCFG_CLOCK_MODE, SYSVDD_VOL_SEL_126V); clk_early_init(TCFG_CLOCK_SYS_SRC, TCFG_CLOCK_OSC_HZ, TCFG_CLOCK_SYS_HZ); tick_timer_init(); /*interrupt_init();*/ #if (defined CONFIG_DEBUG_ENABLE) || (defined CONFIG_DEBUG_LITE_ENABLE) debug_uart_init(NULL); #if TCFG_UART0_RX_PORT != NO_CONFIG_PORT JL_UART0->CON0 &= ~BIT(2); //disable Tx pending Enable uart_dev_set_irq_handler_hook(uart_db_irq_handler_hook); #if TCFG_LOWPOWER_LOWPOWER_SEL /*需要关闭POWERDOWN,否则接收会丢数据*/ #error "need define TCFG_LOWPOWER_LOWPOWER_SEL 0 !!!!!!" #endif #endif #ifdef CONFIG_DEBUG_ENABLE log_early_init(1024); #endif #endif log_i("\n~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"); log_i(" setup_arch %s %s", __DATE__, __TIME__); log_i("~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n"); clock_dump(); efuse_dump(); reset_source_dump(); /* power_reset_source_dump(); */ //Register debugger interrupt /* request_irq(0, 2, exception_irq_handler, 0); */ request_irq(1, 2, exception_irq_handler, 0); sys_timer_init(); debug_init(); /* sys_timer_add(NULL, timer, 1 * 1000); */ __crc16_mutex_init(); } /*-----------------------------------------------------------*/